Back To Top
  • Tenders
  • Technical Specifications

Technical Specification

Technical Specification for pre-tendering purpose of Porcelain housed 12 KV Station Class Lightning Arresters.
Dated: 14.09.2021
Technical Specification for pre-tendering purposes of SCADA Compatible 33 KV extensible Composite GIS Switchgear cum Control, Relay and Metering Panel. Dated: 14.09.2021
Technical Specification for A.C.3 - Phase 4 - Wire, (10-60) a Static Whole Current Energy Meter with LPR facility of 1.0 Class Accuracy used for STW Pump set fitted with Pilfer Proof Meter Box. Dated: 14.09.2021
Technical Specification of the 6.30 MVA & 10 MVA; 33/11 KV ONAN type Transformer with OLTC & SCADA compatible RTCC panel. Dated: 23.09.2021
Technical Specification for ACSR Panther Conductor. Dated: 18.08.2021
Technical specification for 33 KV Indoor Composite VCB Panel. Dated: 16.07.2021
CP/PT operated DLMS compliant energy meter for 33kv bulk consumer.
CP/PT operated DLMS compliant energy meter for 11kv bulk consumer.
LT CT operated DLMS compliant energy meter for LT bulk consumer.
Technical Specification for CP/PT operated DLMS compliant trivector energy meter for 11kv feeder metering.
Technical Specification for Self adhesive Paper Seal with Hologram.
Technical Specification for 12 kV, 400A, 18.4 kA Floor Mounted Indoor Type 3 Panels Vacuum Interrupting Ring Main Unit consisting of 2 nos Incoming Unit and 1 no Series Trip Outgoing Protection and Metering Switchgear as Feeder Unit...Dated: 12.10.2020
Technical Specification for SCADA compatible 11 kV Non extensible 4-Way Ring Main Unit...Dated: 12.10.2020
TECHNICAL SPECIFICATION FOR Control & Relay Panel for 33 kV Feeder with SCADA compatible Directional O/C and E/F protection and 33/11 kV transformer with SCADA Compatible Differential protection for various 33/11 KV Substations in West Bengal.Dated: 24.09.2020
12KV Series Trip Indoor Metering Panel with VCB....dtd 24.09.2020
11 KV 1CX1000 sqmm XLPE Insulated PVC Sheathed Cable
33/0.415KV 100KVA 3 Phase ONAN Cooled, Outdoor type Station Service BIS Level-II complied Transformer (Stack Core type & Non-sealed type).... Dated: 15.07.2020
Technical Specification of EHV Grade Transformer Oil conforming to IS-335-2018.... Dated: 10.08.2020
TECHNICAL SPECIFICATION OF 250 KVA; 11/0.433 KV BOTH OUTDOOR TYPE WITH OUTDOOR BUSHING AT BOTH ENDS AND INDOOR TYPE WITH CABLE END BOX AT BOTH ENDS : 3 PHASE POLE MOUNTED BIS COMPLIED STACK CORE TYPE; ONAN COOLED; NON SEALED TYPE DISTRIBUTION TRANSFORMER...Dated: 30.06.2020
11KV & 33KV Polymer Pin Insulators with FRP diameter 24mm & 33mm respectively.
Technical Specification of EHV Grade Transformer Oil conforming to IS: 335-2018.... Dated: 28.05.2020
Technical Specification of Steel Tubular Poles of sizes 9 Mtr and 11 Mtr. Dated 20.03.2020
11KV & 33KV Polymer Pin Insulators with FRP diameter 24mm & 33mm respectively Dated 14.03.2020.
11KV & 33KV Polymer Disc Insulators(B&S type) Dated 14.03.2020.
11 KV & 33 KV XLPE Insulated Armoured Aluminium Cable Suitable for 3 core & 1 core dated 07.02.2020.
XLPE Insulated and PVC Sheathed H.T.(11 KV) Aerial Bunched (AB) Cables dated 07.02.2020.
1.1 KV PVC Insulated PVC Sheathed Multicore Aluminium Cable (Armoured & Unarmoured)Dated: 07.02.2020.
Technical Specifications for 11KV & 33KV Polymer Disc insulators (B&S type). Dated:07.03.2020
Technical Specifications for 11KV & 33KV Polymer Pin insulators. Dated:07.03.2020
TECHNICAL SPECIFICATION OF 'LT' RING TYPE CURRENT TRANSFORMER - 400/5A. Dated: 25.02.2020
Technical Specification of Steel Tubular Poles of sizes 9 Mtr and 11 Mtr. Dated 28.01.2020
Technical Specification for indoor resin cast type 11KV current & potential transformer housed in a common unit suitable for 11KV bulk consumer. Dated 08.01.2020.
Technical Specification for 132kv CT/PT operated export-import energy meter..Dated:16.01.2020
Technical Specification for Non-communicable Fault Passage Detection System for 33KV and 11KV overhead Networks.Dated:04.12.2019
Technical Specification for Underground L.T. (1.1 KV Grade) Cable Fault Locating equipment and Other Accessories.Dated:26.11.2019
Technical Specification for pre-tendering purposes of 33 KV Indoor VCB Panel (1 LPT + 1 OG)for bulk power supply. Dated:20.11.2019
Technical Specification for pre-tendering purposes of Control & Relay Panel for 33 KV Feeder with non-directional O/C and E/F protection for Bulk power supply to 33 KV consumer. Dated:20.11.2019
Technical Specification for pre-tendering purposes of 33 KV Indoor type Composite VCB with Control & Relay Panel. Dated:20.11.2019
Technical Specification for the purpose of Pre-Tendering of Indoor Resin Cast type 11 KV CT & PT housed in a common unit suitable for 11KV Bulk Consumer. Dated:22.10.2019
Technical Specifications for High Voltage detector with detachable FRP Stick having sensing Range from 230V to 36KV. Dated:16.10.2019
Technical Specifications for pre-tendering purposes of 11KV & 33KV Polymer Disc insulators (B&S type). Dated:16.10.2019
Technical Specifications for pre-tendering purposes of 11KV & 33KV Polymer Pin insulators with FRP diameter 24mm & 33.5mm. Dated:16.10.2019
Technical Specifications for DLMS complied A.C. Single Phase , Two Wire Solid State ( Static) Fully Electronic Energy Meter Accuracy Class: 1.0 , Current Rating (5-30) A, With Backlit LCD Display for 240 V SystemFitted with Pilfer Proof Meter Box. Dated:24.09.2019
Technical Specification for the purpose of Pre-Tendering of Indoor Resin Cast type 11 KV CT & PT housed in a common unit suitable for 11KV Bulk Consumer. Dated:20.09.2019 (Deleted)
Technical Specification for 11 KV Non-extensible 3 Way SF6 insulated RMU (for both bulk consumer and DTR O/D installation). Dated:19.09.2019
Technical Specification of Single Suspension Hardware Fitting suitable for ACSR Wolf conductor. Dated:16.09.2019
Technical Specification for Single Phase Static, 1.0 Class, 5-30Amp., Import-Export Energy Meter with pilfer proof box. Dated:05.09.2019
Technical Specification for 3 Phase 4 Wire CT,PT operated 0.5S Class Tri-Vector Energy Meter for 33KV feeder metering. Dated:05.09.2019
Technical Specification for 3 Phase 4 Wire CT,PT operated 0.5S Class Tri-Vector Energy Meter for 11KV feeder metering. Dated:05.09.2019
Technical Specification for 3 Phase 4 Wire 0.2S Class CT-PT operated Tri-Vector Energy Meter for 132KV bulk consumer. Dated:05.09.2019
Technical Specification for 3 Phase 3 Wire 0.2S Class CT-PT operated Tri-Vector Energy Meter for 132KV traction metering. Dated:05.09.2019
Technical Specification for 11 KV 1C x 1000 sqmm XLPE Cable. Dated:04.09.2019 (Deleted)
Technical Specification for 1.1 KV 1C x 630 sqmm XLPE Cable. Dated:04.09.2019
Technical Specification for 30 V, 35 A, Auto And Manual Float-Cum-Boost Batery Charger Suitable for Charging 30 V, 75 AH, Nickel-cadmium Batteries.. Dated:31.08.2019
Technical Specification for 30V, 75 AH, Nickel-cadmium Stationary Batteries. Dated:31.08.2019
Technical Specification for LT Shunt capacitors. Dated:16.08.2019
Technical Specification of Testing Instruments.. Dated:02.08.2019
Technical Specification for SCADA compatible 11kV Non extensible 4-Way Ring Main Unit. Dated:12.07.2019
Technical Specification for Porcelain 12 KV Distribution class and 42 KV Station class Lightning Arrester.Dated:12.07.2019
Technical Specification for STANDARD TECHNICAL SPECIFICATION FOR UNDERGROUND CABLE FAULT LOCATING EQUIPMENT AND OTHER ACCESSORIES...Dated:16.07.2019
High Voltage Detector with detachable FRP Stick having sensing range from 230 V to 36 KV. Dated:08.07.2019 (Deleted)
Technical Specification for the purpose of Pre-Tendering for 11 KV Non extensible 3 Way SF6 insulated RMU (for both bulk consumer and DTR O/D installation). Dated:15.06.2019 (Deleted)
Technical Specification for the purpose of Pre-Tendering for Indoor 11 KV combined CT & PT suitable for Bulk Consumer. Dated:15.06.2019 (Deleted)
Technical Specification for 11 KV 1C x 1000 Sqmm XLPE Cable. Dated:10.05.2019 (Deleted)
Technical Specification for 1.1 KV m1C x 630 Sqmm XLPE Cable. Dated:10.05.2019 (Deleted)
Technical Specification for LT Shunt capacitors. Dated:31.05.2019 (Deleted)
Technical Specification for the purpose of pre-tendering for 30 V, 35 A, Auto And Manual Float-Cum-Boost Batery Charger Suitable for Charging 30 V, 75 AH, Ni-cd Batteries.. Dated:29.05.2019 (Deleted)
Technical Specification for the purpose of pre-tendering for 30V, 75 AH, Ni-Cd Stationary Batteries. Dated:29.05.2019 (Deleted)
Technical Specification of 110V, 45A Auto Float Cum Boost Battery Charger, 110 V: 150AH Battery and DCDB. Dated:27.05.2019
Technical Specification of 33 KV GIS.. Dated:27.05.2019
Technical Specification of CT-PT Operated, 0.2s class Tri-Vector Energy meter for 132KV bulk consumer. Dated:06.05.2019
Technical Specification of 1 Phase 2 Wire, 2-Channel 0.2s Class meter for Traction application. Dated:06.05.2019
Technical Specification of Single phase 5-30Amp export-import meter fitted with box. Dated:06.05.2019
Technical Specification of 63,100,160 & 315 KVA L.T. Distribution Box. Dated:03.05.2019
Technical Specification for LT Shunt capacitors. Dated:25.04.2019
Technical Specification for Current Transformer Analyzer. Dated:11.04.2019
Technical Specification for 0-80 KV, A.C. H.V Test Set....Dated:11.04.2019
Technical Specification for Underground L.T. (1.1 KV Grade) Cable Fault Locating equipment and Other Accessories.Dated: 11.04.2019 (Deleted)
Technical Specification for Communication and Non-Communicable Fault Passage Detection System for 33KV and 11KV Overhead Networks. Dated: 29.03.2019
'
Technical Specification for A.C. 3 Phase 4 Wire, (10-60) A Static Whole Current Energy Meter with LPR facility of 1.0 Class Accuracy used for STW Pump Set fitted with Pilfer Proof Meter Box. Dated:18.02.2019
Technical Specification for AC 3 Phase 4 Wire 240V LT CT Operated Fully Static AMR Compatible DLMS Compliant Category C1 Tri Vector Energy Meter of 0.5s Accuracy Class and 200/5A CTR. Dated:18.02.2019
Technical Specification for AC 3 Phase 4 Wire 240V LT Solid State (Static) Whole Current Import - Export Energy Meter of 1.0 Class Accuracy and 5-30A Current Rating with Pilfer Proof Meter Box. Dated:18.02.2019
TECHNICAL SPECIFICATION FOR 3 PHASE 4 WIRE CT & PT OPERATED 0.5S ACCURACY CLASS CAT B STATICTRIVECTOR ENERGY METER FITTED WITH PILFER PROOF METER BOX SUITABLE TO HOUSE THE METER & TEST TERMINAL BLOCK FOR BOUNDARY METERING IN 11 KV FEEDER. Dated:18.02.2019
Technical Specification for 33KV GIS Switchgear Panel. Dated: 09.02.2019 (Deleted)
Technical Specification for 110V, 80A Auto & Manual Float cum Boost Battery Charger and 110V, 500AH Battery and DCDB. Dated: 09.02.2019(Deleted)
TECHNICAL SPECIFICATION FOR 33 KV INDOOR COMPOSITE VCB PANEL. Dated: 01.02.2019
Technical Specification for 12KV indoortype metering sries trip RMU with VCB. Dated: 30.01.2019
Technical Specification for Underground 1.1 KV Grade LT Cable Fault Locating Instrument and Other Accessories For The Purpose Of Pre-Tendering. Dated: 19.12.2018 (Deleted)
Technical Specification for Communication and Non-Communicable Fault Passage Detection System for 33KV and 11KV Overhead Networks. Dated: 19.12.2018 (Deleted)
Technical Specification for 3 Phase 4 Wire LT CT operated Import-Export Energy Meter of 0.5s Accuracy Class. Dated: 12.12.2018
Technical Specification for 11KV, import-export bulk meter. Dated: 22.09.2018
Technical Specification for 11KV, 3phase 4wire DLMS Bulk Meter. Dated: 22.09.2018
Technical Specification for 33KV, import-export bulk meter. Dated: 22.09.2018
High Voltage Detector with detachable FRP Stick having sensing range from 230 Volt to 36 KV. Dated:11.09.2018 (Deleted)
TECHNICAL SPECIFICATION FOR Control & Relay Panel for 33 kV Feeder with SCADA compatible Directional O/C and E/F protection and 33/11 kV transformer with SCADA Compatible Differential protection for various 33/11 KV Substations in West Bengal. Dated:28.08.2018 (Deleted)
Technical Specification of Wide Flange Beam WPB 160 x 160x 30.44Kg/m. Dated:18.08.2018
E-House of 33/11 KV (Compact Sub Station). Dated:10.08.2018
12.1/12.65 KV Pole-mounted automatically switched capacitor banks of 150 KVAR. Dated:06.07.2018
SCADA Compatible 11 KV Shunt Trip Switchgear dtd:03.07.2018
11 KV Combined CT & PT with CTR: 200-100/1A suitable for three element meter. Dated:30.06.2018
OUTDOOR TYPE DISTRIBUTION PLOT & SERVICE JUNCTION BOX. Dated:13.06.2018
3 PHASE 4 WIRE CT & PT OPERATED ENERGY METER FITTED WITH PILFER PROOF METER BOX FOR BOUNDARY METERING IN 11 KV FEEDER. Dated:13.06.2018(Deleted)
12.1/12.65KV Pole mounted automatically switched capacitor banks of 150 KVAR Dated:13.06.2018
High Voltage Detector with detachable FRP Stick having sensing range from 230 Volt to 36 KV. Dated:07.06.2018(Deleted)
Technical Specification For 33 KV Single Phase Dead Tank Type Outdoor Current Transformer with CTR:- 200-100-50/1-1A. Dated:17.05.2018
Technical Specification for 3Phase 4 Wire 240V Whole Current Import - Export Energy Meter fitted with box. Dated:17.05.2018
Technical Specification for 3Ph 4 WIRE CT/PT OPERATED DLMS COMPLIANT 11 KV Bulk Consumer Meter. Dated:17.05.2018(Deleted)
Technical Specification for ACSR PANTHER CONDUCTOR. Dated:14.05.2018
TECHNICAL SPECIFICATION OF 630 KVA; 11/0.415 KV BOTH OUTDOOR/INDOOR TYPE WITH WITH CABLE END BOX AT BOTH ENDS; 3-PHASE PLINTH MOUNTED BIS Level-II COMPLIED STACK CORE TYPE; ONAN COOLED; NON SEALED TYPE DISTRIBUTION TRANSFORMER. Dated:15.05.2018
Technical Specification for Pre-stressed Cement Concrete Poles. Dated:05.05.2018
TECHNICAL SPECIFICATION of FRTU suitable for 4 Way RMU. Dated:12.04.2018
TECHNICAL SPECIFICATION OF 'LT' RING TYPE CURRENT TRANSFORMER.Dated:12.04.2018
Technical Specification of 6.30 & 10 MVA;33/11 KV Power Transformer with OLTC & SCADA compatible RTCC panel meant for DDUGJY & IPDS project....Dated:21.03.2018
TECHNICAL SPECIFICATION FOR Control & Relay Panel for 33 kV Feeder with SCADA compatible Directional O/C and E/F protection and 33/11 kV Transformer with SCADA compatible Differential Protection FOR Various 33/11 KV Substations in West Bengal. Dated:17.03.2018 (Deleted)
TECHNICAL SPECIFICATION FOR OUTDOOR TYPE DISTRIBUTION FEEDER PILLAR BOX.....Dated:08.03.2018
TECHNICAL SPECIFICATIONS of 1.1KV LT AERIAL BUNCHED CABLES.....Dated:27.02.2018
TECHNICAL SPECIFICATIONS FOR 1000 KVA, 11/0.415 KV PACAKAGE TYPE SUB-STATION (PSS)/CONTAINER TYPE SUB-STATION (CSS).....Dated:07.01.2018
Technical Specification for A.C. 3-Phase 4 - Wire CT, PT OPERATED LAG PLUS LEAD ONLY FULLY STATIC AMR COMPATIBLE TRI-VECTOR ENERGY METER FOR 33 KV FEEDER.....Dated:09.01.2018
Technical Specifications for three Phase Class 1.0 Accuracy Static Energy Meter Suitable for Pre-paid system.....Dated:09.01.2018
3Ph 4 WIRE LT CT & 3Ph 3/4 WIRE HT CT/PT OPERATED FULLY STATIC AMR COMPATIBLE TRI-VECTOR ENERGY METERS DLMS COMPLIANT - CATEGORY 'C1'....Dated:09.01.2018
Technical Specification for A.C. 3-Phase 4-Wire L.T. Solid State (Static) Whole Current DLMS Compliant
Energy Meter of 1.0 Class Accuracy and Current Rating (5-30) Amp and(20 - 100) Amp. with Pilfer Proof Meter Box....Dated:09.01.2018
X-LINKED POLYETHYLENE INSULATED AND PVC SHEATHED H.T. (11KV) AERIAL BUNCHED CABLES....Dated:08.01.2018
1000 KVA, 11/0.433 KV package type SUB-STATION (PSS)/CONTAINER TYPE SUB-STATION (CSS)
with data stamping as finalised after pre-tender meeting....Dated:03.01.2018(Deleted)
XLPE Armoured Aluminum Cable suitable for 3 Core & 1 Core....Dated:03.01.2018
TECHNICAL SPECIFICATION of ACSR Conductors....Dated:23.09.2017
TECHNICAL SPECIFICATION FOR 36KV,400 Amps ROCKING TYPE T.P.G. O. ISOLATORS....Dated:14.12.2017
TECHNICAL SPECIFICATION FOR 11KV,200 Amps ROCKING TYPE T. P.G. O. ISOLATORS....Dated:14.12.2017
TECHNICAL SPECIFICATION FOR TENSION HARDWARE FITTINGS FOR T&C TYPE DISC INSULATOR COMPRISING OF CROSS-ARM STRAP BOLTED TYPE TENSION CLAMP TO BE USED FOR ACSR WOLF & ACSR DOG CONDUCTOR....Dated:13.12.2017
315 KVA; 11/0.433 KV Oil Cooled BIS Level-II Distribution Transformer in the WBSEDCL website.....Dated:06.12.2017
80 KV AC High Voltage Test Set....Dated:05.12.2017 (Deleted)
Current Transformer Analyzer....Dated:05.12.2017(Deleted)
630 KVA; 11/0.415 KV Dry (Cast Resin) Type Distribution Transformer....Dated:05.12.2017
SCADA compatible 11kV Non extensible 3-Way Indoor Ring Main Unit along with metering arrangement.....Dated:30.11.2017
SCADA compatible 11kV Non extensible 3-Way Ring Main Unit.....Dated:09.01.2018
SCADA compatible 11kV Non extensible 4-Way Ring Main Unit.....Dated:09.01.2018 (Deleted)
TECHNICAL SPECIFICATION FOR 12 KV STATION CLASS LIGHTNING ARRESTORS.....Dated:07.11.2017
1000 KVA, 11/0.415 KV PACAKAGE TYPE SUB-STATION (PSS)/CONTAINER TYPE SUB-STATION (CSS) FOR THE PURPOSE OF PRE-TENDER.....Dated:07.11.2017
A.C. 3 - Phase 4 - Wire, (10-60) A Static Whole Current Energy Meter with LPR facility of 1.0 Class Accuracy used for STW Pump Set fitted with Pilfer Proof Meter Box.....Dated:25.10.2017
AC Whole Current Smart Energy Meter Prepaid and Postpaid.....Dated:26.09.2017
11 KV & 33 KV Polymer Pin Insulators....Dated:07.09.2017
11 KV & 33 KV Polymer Disc Insulators (B&S type)....Dated:07.09.2017
Tchnical Specification for 25 , 63 , 100 & 160 KVA , 11/0.433 KV ONAN Type , BIS Level-II , Distribution Transformer for empanelment as Vendor.....Dated:04.09.2017
3-PHASE 4-WIRE CT OPERATED FULLY STATIC AMR COMPATIBLE TRIVECTOR ENERGY METERS.....Dated:28.08.2017
1000 KVA, 11/ 0.415 KV DRY TYPE (CAST RESINE TYPE) OUTDOOR/ INDOOR TRANSFORMERS.....Dated:28.08.2017
11 KV & 33 KV POST INSULATORS, 11 KV & 33 KV PIN INSULATORS AND 11 KV, B&S TYPE 45 KN & 70 KN DISC INSULATORS.....Dated:18.08.2017
PORTABLE THREE PHASE FULLY AUTOMATIC TEST SYSTEM WITH INTEGRATED CURRENT AND VOLTAGE SOURCE OF ACCURACY 0.05....Dated:09.08.2017
A.C. 3 Phase 4 Wire L.T. Solid State (Static) Whole Current DLMS Compliant Energy Meter of 1.0 Class Accuracy and Current Rating (5-30) Amp and (20 - 100) Amp. with Pilfer Proof Meter Box....Dated:09.08.2017(Deleted)
3PHASE 4 WIRE LT CT, 3PHASE 3 WIRE CT/PT & 3PHASE 4 WIRE CT/PT OPERATED FULLY STATIC AMR COMPATIBLE TRI-VECTOR ENERGY METERS FOR BULK CONSUMER....Dated:09.08.2017(Deleted)
10 POSITION FULLY AUTOMATIC METER TESTING EQUIPMENT WITH REFERENCE METER OF CLASS 0.02 ....Dated:09.08.2017
13/11m Hot Rolled Parallel Flange Steel Section ....Dated:09.08.2017
Fault Passage Detection System (Communicable and Non-communicable) for 33KV and 11KV Overhead Networks....Dated:31.07.2017 (deleted)
1.1 KV XLPE insulated PVC sheathed single & multicore Aluminum Cable (armoured & unarmoured)...Dated:26.07.2017
1.1 KV PVC insulated PVC sheathed multicore Aluminium Cable (armoured & unarmoured)...Dated:26.07.2017
TECHNICAL SPECIFICATION OF 630 KVA; 11/0.415 KV BOTH OUTDOOR/INDOOR TYPE WITH WITH CABLE END BOX AT BOTH ENDS : 3 PHASE PLINTH MOUNTED BIS COMPLIED STACK CORE TYPE; ONAN COOLED; NON SEALED TYPE DISTRIBUTION TRANSFORMER...Dated:29.06.2017(Deleted)
Technical Specification for 33 KV Indoor Composite VCB Panel...Dated:12.07.2017
STANDARD TECHNICAL SPECIFICATION FOR UNDERGROUND CABLE FAULT LOCATING EQUIPMENT AND OTHER ACCESSORIES...Dated:11.07.2017(Deleted)
1000 KVA, 33/ 0.415 KV DRY TYPE OUTDOOR/ INDOOR TRANSFORMERS (For Non Departmental procurement for Housing only)...Dated:11.07.2017
Technical Specification of XLPE Insulated and PVC Sheathed 11KV H.T. Aerial Bunched Cables...Dated:22.06.2017
STANDARD TECHNICAL SPECIFICATION FOR CABLE FAULT LOCATING EQUIPMENT AND OTHER ACCESSORIES....Dated:16.05.2017(Deleted)
TECHNICAL SPECIFICATION FOR SELF ADHESIVE METER SECURITY SEALS WITH HOLOGRAM..Dated:28.04.2017
Technical Specification of ACSR Conductors...Dated:08.04.2017
Technical Specification For 33 KV, Single Phase, Dead Tank Type Out Door Current Transformer Of Different Ratio...Dated:01.03.2017
Specification of 33 KV Single Phase Out Door Type Potential Transformer..Dated:01.03.2017
Technical Specification of 132 KV Tri-Vector 1 Phase 2 Wire, 2-Channel 0.2S Class meter for Traction application only...Dated:18.03.2017
TECHNICAL SPECIFICATION OF 10 POSITION FULLY AUTOMATIC METER TESTING EQUIPMENT WITH REFERENCE METER OF CLASS 0.02..Dated:16.03.2017(Deleted)
TECHNICAL SPECIFICATION FOR PORTABLE THREE PHASE FULLY AUTOMATIC TEST SYSTEM WITH INTEGRATED CURRENT AND VOLTAGE SOURCE OF ACCURACY 0.05..Dated:16.03.2017(Deleted)
TECHNICAL SPECIFICATIONS FOR X-LINKED POLYETHYLENE INSULATED AND PVC SHEATHED H.T. (11KV) AERIAL BUNCHED CABLES..Dated:01.03.2017(Deleted)
Single phase DLMS whole current 5-30 Amp meter with change in Auto Display Parameter..Dated:24.02.2017
3Phase 4wire 10-60 Amp. whole current static meter with LPR facility and pilfer proof meter box..Dated:14.02.2017
Technical Specification of EHV Grade Transformer Oil confirming to IS-335-1993..Dated:22.02.2017
SPECIFICATION for 1.1 KV L.T.Aerial Bunched cables...Dated:17.02.2017 (Deleted)
TECHNICAL SPECIFICATION OF 16 , 25, 63, 100 & 160 KVA; 11/0.433 KV DTR...Dated:18.02.2017
XLPE ARMOURED ALUMINIUM CABLE SUITABLE FOR 3 CORE & 1 CORE.
SPECIFICATION FOR COMPRESSION TYPE TENSION HARDWARE FITTING FOR ACSR WOLF & PANTHER
CONDUCTOR.....Dated..22.12.2016
SPECIFICATION FOR BOLTED TYPE TENTION HARDWARE FITTING FOR ACSR WEASEL/RABBIT AND ACSR DOG CONDUCTOR.....Dated..22.12.2016
33 KV XLPE Armoured Aluminium 1Core x 1000 sq. mm Cable in the Website of WBSEDCL.....Dated..08.11.2016(Deleted)
11 KV 400 A TPGO Isolator(Rocking Type).....Dated..25.11.2016
11 KV 400 A TPGO Isolator(Rocking Type).....Dated..25.11.2016
33 KV 400 A TPGO Isolator (Rocking Type).....Dated..25.11.2016
33 KV 400 A Double Break CR type Isolator.....Dated..25.11.2016
Single phase 10-60Amp pre paid meter....Dated..10.11.2016
3Phase 20-80Amp.Pre paid meter.....Dated..10.11.2016
Single phase 10-60Amp pre paid meter....Dated..10.11.2016
Technical Specification for 33 KV XLPE Armoured Aluminium 1 core x 1000 Sq.mm....dated...08.11.2016
Technical Specification of 1.1 KV PVC 2 core 4 Sq.mm and 2 core 6 Sq.mm...dated...08.11.2016(Deleted)
SPECIFICATION FOR COMPRESSION TYPE TENSION HARDWARE FITTINGS FOR ACSR WOLF & PANTHER CONDUCTOR...dtd.03.11.16(Deleted)
SPECIFICATION FOR BOLTED TYPE TENSION HARDWARE FITTINGS FOR ACSR WEASEL RABBIT AND ACSR DOG CONDUCTOR...dtd.03.11.16(Deleted)
TECHNICAL SPECIFICATION OF 'LT' RING TYPE CURRENT TRANSFORMER....dated...05.10.2016
TECHNICAL SPECIFCATION FOR 3PHASE 4 WIRE CT, PT OPERATED 3PHASE LAG ONLY FULLY STATIC AMR COMPATIBLE TRI-VECTOR ENERGY METERS FOR BULK CONSUMER....dated...05.10.2016(Deleted)
Technical Specification of 6.30 & 10 MVA;33/11 KV Power Transformer with OLTC & SCADA compatible RTCC panel meant for DDUGJY & IPDS project....Dated...06.09.2016(Deleted)
Technical Specification of KVA;33/0.415 KV Station Service Distribution Transformer meant for DDUGJY & IPDS project...Dated..06.09.2016
Technical Specification of 1.1 KV PVC 2 Core 4 & 6 Sq.mm. Cable......Dated...10.08.2016(Deleted)
3phase 4wire 10-60 Amp STW meter fitted with pilfer proof meter box and with LPR facility...Dated...03.08.2016(Deleted)
DLMS compliant 3phase 4wire 5-30Amp and 20-100Amp meter fitted with pilfer proof meter box...Dated..03.08.2016(Deleted)
Technical Specification for three phase static whole current DLMS meter of accuracy class1.0,current rating 5-30 Amp& 20-100 Amp....Dated on 28.06.2016(Deleted)
Technical Specification for 33 KV XLPE Cable....dated....11.06.2016
Technical Specification for 11 KV XLPE Cable....dated....11.06.2016
Technical Specification for 1.1 KV Copper Control Cable...dated..11.06.2016
Technical Specification for 1.1 KV PVC Cable...dated..11.06.2016(Deleted)
Technical Specification of 11KV & 33KV Polymer Disc Insulator(B&S type).......dated...07.06.2016(Deleted)
Technical Specifications of 315 KVA;11/0.433 KV DTR as on 06.06.2016
Technical Specification of 16,25,63,100 KV and 160 KVA;11/0.415 KV DTR...............Dt. 06.06.2016(Deleted)
Technical Specifications of 100 KVA;33/0.4 KV DTR meant for Station Service as on 06.06.2016(Deleted)
Technical Specifications for DC Distribution Board.....Dated...02.06.2016
Technical Specifications for AC Distribution Board.....Dated...02.06.2016
Technical Specifications 30V,35A Auto and Manual Float-cum-Boost Battery Charger....Dated...02.06.2016
Technical Specifications 30V,100 AH Plante type Lead Acid Battery...Dated...02.06.2016
Technical Specifications for 1.1KV Copper Control Cable
Technical Specifications for 1.1KV PVC Armoured Aluminium Cable(Deleted)
Technical Specifications for 11KV Armoured Aluminium XLPE Cable
Technical Specifications for 33KV Armoured Aluminium XLPE Cable
Technical Specifications for Single Phase Electronic Energy Meter of Class 1.0 Accuracy(Deleted)
Technical Specifications for three Phase Class 1.0 Accuracy Static Energy Meter Suitable
for Pre – paid system(Deleted)
Technical Specifications for A.C. Single Phase, 2 Wire Solid State(Static) Fully Electronic Energy Meter Accuracy Class: 1.0, Current Rating(5-30) A, With Backlit LCD Display for 240 V System..........Dated. 17.10.2015
Technical Specification of 630 KVA, 11/0.415 KV Dry Type Outdoor Transformers..........Dated. 31.08.2015
Technical Specification for 33 KV Indoor Composite VCB Panel.......Dated. 03.09.2015(Deleted)
Technical Specification for A.C. 3–Phase 4 Wire, (10-60) A Static Whole Current Energy Meter with LPR facility of 1.0 Class Accuracy used for STW Pump Set Fitted with Pilfer Proof Meter Box......Dated. 28.07.2015
Technical Specifications for A.C. Single Phase , 2Wire Solid State( Static) Fully Electronic Energy Meter Accuracy Class: 1.0 , Current Rating(5-30) A, With Backlit LCD Display for 240 V System Fitted inside with / without Pilfer Proof Meter Box......Dated. 28.07.2015
Technical Specification for 1.1 KV Grade PVC Armoured Aluminum Cable......Dated. 22.07.2015(Deleted)
Technical Specification for 3ph 4 Wire LT CT Operated Fully Static AMR Compitable Tri-Vector Energy Meters, 240V, CT Ratio 200/5A, DLMS Compliant- Category 'C'......Dated. 14.07.2015
Technical Specification of 11KV & 33KV Polymer Disc Insulator......Dated. 29.07.2015
Technical Specification of 11KV & 33KV Polymer Pin Insulator..........Dated..07.06.2016
Technical Specification for 11/0.415 KV 160 KVA & 630 KVA and 11/0.433 KV 315 KVA Outdoor Type & Cable end Box Type Distribution Transformers......Dated. 29.06.2015
Single Phase Energy Meter, Current Rating 5-30 Amp. and Class of Accuracy 1.0, Current Rating (5-30) A, With Backlit LCD Display for 240 V System Fitted Inside With/Without Pilfer Proof Meter Box.......Dated. 17.06.2015
TECHNICAL SPECIFICATION OF POLYCARBONATE SECURITY SEALS.......Dated. 02.06.2015
Technical Specification for A.C. Single Phase , 2Wire Solid State (Static) Fully Electronic Energy Meter Accuracy Class: 1.0 , Current Rating (5-30) A, With Backlit LCD Display for 240 V System Fitted inside With/ Without Pilfer Proof Meter Box.......Dated. 26.05.2015
Technical Specification of 11KV Non extensible 4-Way Out Door SF6 Insulated Ring Main Unit.......Dated. 23.06.2015
Technical Specification For 33 KV, Single Phase, Dead Tank Type Out Door Current Transformer Of Different Ratio.....Dated....01.03.2016
Technical Specification for 0.2s Accuracy Class Static (Digital) Summation Unit Suitable for 132KV Bulk Consumer Multi-Feeder Metering And Standard Summation Setering..........09.08.2014
TECHNICAL SPECIFICATION OF POLYCARBONATE SECURITY SEALS.............22.07.2014
TECHNICAL SPECIFICATION OF PATENTED POLYCARBONATE SECURITY SEALS.............22.07.2014
TECHNICAL SPECIFICATION FOR SELF ADHESIVE METER SECURITY SEALS WITH HOLOGRAM.............22.07.2014
Technical Specification for Lightning Arrestor. 17.06.2014 (Deleted)
Technical Specification of 33 Control & Relay panel for 33 KV Feeder Control with SCADA compatible Direction O/C & E/F protection and 33/11 KV transformer Control panel with SCADA Compatible Differntial protection for various 33/11 KV Sub-Station in West Bengal....Dated....13.05.2016
DTR Meter With In-Built CT & Modem..............10.06.2014
Technical Specification of 30V, 20.5A Auto & Manual Float Cum Boost Battery Charger..........Dated. 09.06.2014
Technical Specification of 30V,75AH Plante Type Battery........ Dated. 09.06.2014
Technical Specification For 3-Phase 4-Wire Thread Through Type Composite Unit-Built In CT Fullystatic AMR Compatible TRI-Vector Energy Meters Suitable Upto 160KVA Distribution Transformer.........dt 01.04.2014
Technical Specification for Frequency Synthesised Microprocessor based VHF Transciever base (Fixed) Station Set.........dt 13.03.2014
Technical Specification for A.C. 3 – Phase 4 – Wire L.T. Solid State (Static) Whole Current Energy Meter of 1.0 Class Accuracy and Current Rating (20 - 100) Amp. with Pilfer Proof Meter Box.........dt 03.02.2014
Technical Specification for A.C. 3 – Phase 4 – Wire, (10-60) A Static Whole Current Energy Meter with LPR facility of 1.0 Class Accuracy used for STW Pump Set fitted with Pilfer Proof Meter Box.........dt 03.02.2014
Technical Specification for A.C. 3 – Phase 4 – Wire L.T. Solid State (Static) Whole Current Energy Meter of 1.0 Class Accuracy and Current Rating (5 -30) Amp. with Pilfer Proof Meter Box.........dt 03.02.2014
Technical Specification for 11KV Combined Current & Potential Transformer Suitable for Three Element Meter.dt 31.01.2014 (Deleted)
TECHNICAL SPECIFICATION OF 'LT' RING TYPE CURRENT TRANSFORMER.........dt 28.11.2013
Technical Specifications for A.C. Single Phase,2Wire Solid State(Static) Fully Electronic Energy Meter Accuracy Class: 1.0, Current Rating (5-30) A, With Backlit LCD Display for 240 V System Fitted inside Pilfer Proof Meter Box dt 28.11.2013
Technical Specification of 'LT' Ring Type Current Transformer...................dt 13.09.2013
Technical Specification of L.T Distribution Kiosk ............dt 06.08.2013
Technical Specification For 33Kv Outdoor Type Vacuum Circuit Breaker...Dated...01.03.2016
Technical Specification of 33 KV Out Door Potential Transformer........Dated...01.03.2016
Technical Specification for P-29-2012-13-DLMS & NON-DLMS 11KV BULK & LT BULK DLMS ............dt 18.02.2013
Technical Specification for Polycarbonate Security Seal..................................... dt 09.10.2012
Technical Specification for 11/0.433 KV, 16 KVA to 630 KVA Distribution Transformers .....dt 27.09.2012
Technical Specification for 10 MVA & 6.3 MVA Power Transformer Against Tender Notice No.: P-17-2012-13 ..................................... dt 28.08.2012
Technical Specification for A.C. 3 – Phase 4 – Wire L.T. Solid State ( Static) Whole Current Energy Meter for Import and Import-export of 1.0 Class Accuracy and Current Rating 20-100 Amp.with Pilfer Proof Meter Box .........dt. 14.08.12
Technical Specification for 3 – Phase 4 – Wire Static Whole Current Energy Meter with LPR facility of 1.0 Class Accuracy used for STW Pump Set, with Pilfer Proof Meter Box .........dt. 14.08.12
Technical Specification for A.C. 3 – Phase 4 – Wire L.T. Solid State ( Static) Whole Current Energy Meter for Import and Import-export of 1.0 Class Accuracy and Current Rating 5 -30Amp.with Pilfer Proof Meter Box .........dt. 14.08.12
Technical Specification for 11/0.433KV, 16 TO 630 KVA Distribution Transformers .........dt. 01.06.12
Technical Specification for Accessories related to H.T. Arial Bunch Cable...........dt. 28.05.12
Technical Specification for Accessories related to L.T. Arial Bunch Cable...........dt. 28.05.12
Technical Specification for Aerial bunched cable having XLPE insulated L.T. Cable for working voltage upto 1100 Volt...........dt. 28.05.12
Technical Specification for X-Linked Polyethylene insulated and PVC Sheathed H.T.(11KV) Aerial Bunched Cables ..........dt. 28.05.12
Technical Specification for Prestressed Cement Concrete Poles...........dt. 11.04.12
Technical Specification of Laptop & MOXA Converter...........dt. 01.06.12
Technical Specification 3Ph 4 Wire HT CT/PT Operated fully Static AMR compatible tri-vector Energy Meters DLMS compliant Category 'C' for 11KV Bulk Consumer Meter...........dt. 10.03.12
Technical Specification for 33KV Control and Relay panel with SCADA compatible numerical relay for WBSEDCL system ............dt. 21.02.14
Technical Specification for 33/0.4KV,100 KVA Station Service Transformer ............dt. 08.02.12
Technical Specification for High Tension Line hardware and accessories for ASCR Wolf Conductor ............dt. 24.12.11(Deleted)
Technical Specification of 3Ph 4 WIRE LT CT & 3Ph 3/4 wire HT CT/PT operated fully static AMR compatible tri-vector energy meters DLMS complaint Category 'C' ............dt. 22.12.11
Technical Specification of 3 Phase 4 Wire CT operated fully static AMR compatible tri-vector energy meters .........Dt.22.12.11
Technical Specification of 16, 25, 63 & 100 KVA : 11/O.433 KV : 3 Phase pole mounted outdoor type distribution transformers. ....dt. 26.06.13
Technical Specification of 11/0.415 KV 160 KVA,630 KVA & 11/0.433 KV 315 KVA indoor & outdoor type distribution transformers. ....dt. 26.06.13
Technical Specification 630 KVA & 315 KVA oil type distribution transformers ....dt. 23.12.11
Technical Specification of 3 Phase 3 Wire CT/PT Operated fully Static AMR commpatible tri-vector energy meters .....Dt.23.11.11
Technical Specification for 11 post insulators, 11&33 kv pin insulators and 11kv, B/S type 45kn & 70kn disc insulators ..Dt.21.02.14(Deleted)
Technical Specification for 33 kv, outdoor type vacuum circuit breaker .......Dt.12.4.11
Technical Specification for 33 kv, 1 phase, dual core, outdoor type, potential transformer .......Dt.12.04.2011
Technical Specification for Procurement of 1000, 800,630, 315 & 100 kva, 11/0.415 kv, oil type dtr. for the use at bulk consumer premises for indoor installation with cable connection at both HV & LV end. ......Dt.5.4.2011
Technical Specification for 10 mva & 6.3 mva power transformer
Technical Specification for a.c single phase, 2 wire solid state(static) fully electronic energy meter, accuracy class 1.0 & current rating 5-30 Amp. with backlit LCD display 240 Volt system fitted with pilfer proof meter box ........Dt.28.2.11
Technical Specification for A.C 3 phase, 4 wire solid state (static) whole current lag only energy meter with LPR facility & backlit LCD display used for balanced/unbalanced load, accuracy class 1.0, current rating :10-60 amps in STW pump set fitted with pilfer proof meter box .......Dt.28.2.11
Technical Specification for A.C. 3 Phase, 4 Wire L.T. Solid State (Static)Whole Current Energy Meter with Backlit LCD Display for Balanced/Unbalanced load, Accuracy Class 1.0, Current Rating:5-30 Amp. & 20-100 Amp. and with Pilfer Proof Meter Box......Dt.27.1.11
Technical Specification for lighting arrestors.. .....Dt.24.1.2011
Technical Specification for 12KV, 400A,18.4 KA Floor Mounted Indoor Type Totally Enclosed Series Trip Metering Switchgear with Vacuum Circuit Breaker Unit........ Dated. 27.09.2014(Deleted)
Technical Specification for high tension line hardware & accessories for ACSR panther & wolf conductor(Deleted)
Technical Specification for G.I. Wire & Stay Wire
Technical Specification for G.I. pin to be used with 11 kv & 33 kv pin insulator ........Dt.24.12.11
Technical Specification of EHV Grade Transformer Oil confirming to IS:335-1993.....dtd..07.06.2016(Deleted)
Technical Specification for composite hardware fittings for 11kv/33kv overhead lines comprising of G.I. cross-arm strap, ball clevis & socket eye and aluminium tension clamp for ACSR RABBIT/WEASEL & Dog conductors(Deleted)
Technical Specification for A.C. Single Phase, 2 Wire Solid State Fully Electronic Energy Meter, Accuracy Class 1.0 & Current Rating : 5-30 Amp. with Backlit LCD Display for 240 Volt System and with Pilfer Proof Meter Box ....Dt. 01.06.2012
Technical Specification for 3 – Phase 4 – Wire Static Whole Current Energy Meter of 1.0 Class Accuracy
Technical Specification for distribution transformers (16 to 160 kva and 315 & 630 kva oil type distribution transformers ........Dt.10.12.2010)
Technical Specification for 3 Phase 3 wire CT/PT operated fully static, AMR compatible tri-vector energy meter, accuracy class 0.5s fitted with pilfer proof meter box suitable to house the meter & test terminal block (ttb) for 11kv boundary metering project
Technical Specification of SCADA Compatible 11 KV Shunt Trip Switchgear. Dated. 07.06.2016 (Deleted)
Technical Specification For 11 KV Combined Current & Potential Transformer Suitable for THREE ELEMENT METER ....Dt 13.12.2013
Technical Specification of ACSR Conductors......Dt. 12.04.2014(Deleted)
Technical Specification of 1.1KV Copper Control Cable
Technical Specification of XLPE Insulated Cable for working voltage upto &
including 1100 volts(Deleted)
Technical Specification of XLPE Cable suitable for 3 Core & 1 Core(Deleted)
Technical Specification of accessories for Aerial Bunched Cables
Technical Specification of PVC insulated cable(Deleted)
Technical Specification of 1.1KV Grade Control Cable 2008
Technical Specification of 33-11KV 3C & 1C XLPE Cable
Technical Specification of Tubular Pole
Technical Specification for 36 KV, 400 AMPS, Rocking Type TPGO Isolator.......Dated. 07.10.2015(Deleted)
Technical Specification of XLPE insulated cable 1.1KV(Deleted)
Technical Specification of G.I. Earth Spike
1   of 10 no-image present no-image present